The earliest sunshade is operated from the car, the advantage is relatively convenient, will not be lost. The disadvantage is that the effect is too poor. Because it can not completely protect the center console, there will always be light leakage. And the central console of the car is not just a part of the car, it extends all the way to the engine compartment. From the outside of the car, the part under the windshield to the middle of the engine cover is actually the same as the central console, which can not be covered. The temperature of the central console will never come down.
High temperature and humidity: high temperature and humidity in summer and autumn are also factors that affect the normal work of car stereos. The car is in the upper part of the dashboard, in order to avoid sunlight, the use of sunshade can achieve better results. Timely release of static electricity: more attention should be paid to the use of car stereo in winter, because the climate is dry in winter, turning on warm air in the car will cause drier, which is prone to static electricity.
[company profile] Beijing Hanyi Automobile Accessories Co., Ltd. (hereinafter referred to as Hanyi), located in Shunyi District, is a joint stock joint venture co., Ltd., which integrates strategic investment and management, and is jointly invested by China and South Korea. The company was founded on December 2, 2003 with a registered capital of 10.2 million US dollars, mainly in the development and manufacture of car door guard panels, inner roof panels, dashboards, seats, package plates, sunshades, carpets, rear box panels and other automobile accessories, and sell self-produced products and provide technical services for self-produced products. At present, it mainly provides services for Beijing Hyundai, Beijing Automobile, Beijing Mercedes-Benz and Futian.
With the improvement of consumption level, in addition to the traditional safety requirements, consumers also pay more attention to comfort and driving experience when buying cars, so the quality of car interior has gradually become one of the important selling points. the automobile interior industry has also ushered in the rapid development. Car interior parts include car seats, door panels, dashboards, armcases, sunshades, column panels and other subdivided categories. Among them, the car seat accounts for the highest proportion of the value of automobile interior parts, reaching 45%, followed by the dashboard assembly, accounting for 13%.
(1) in order to avoid heatstroke during the construction period, sunshades and rest rooms should be set up at the construction sites of each shift at the construction site, and each construction personnel should be provided with a towel in each rest area. The construction personnel should go back to the rest area every 2 hours to have a rest for 15 minutes to prevent unnecessary dangerous accidents. Ice cubes, tea, towels, anti-heat medicine, etc., in the lounge.
Why the car stereo can not be exposed to the sun, the car audio is mostly installed on the upper part of the dashboard; if the door and window seals are not strict, they should be replaced, otherwise the loudspeakers are easy to rust and damage, or even cause short-circuit burning of the mainframe; the circuit boards and plastic components in the audio mainframe have different degrees of aging due to temperature changes. In the scorching sun, it is good to use sunshades to ward off the scorching sun and avoid direct sunlight.
The heat preservation of the greenhouse is very high in summer, so all the vents around the vegetable greenhouse must be opened. If the temperature is too high, the top of the vegetable greenhouse can be covered with sunshade net to cool down. In the sunny day, the temperature in the shed should be measured in time. As soon as the temperature rises to more than 30 ℃, open the ventilation vents on both sides and adjust the vents to stabilize the temperature in the shed at 25 ℃-30 ℃ as far as possible. Take light enhancement measures to increase light intensity and prolong light time; select agricultural film with high light transmittance and wipe it frequently to ensure that the surface of agricultural film is clean; cover white plastic film; hang reflective curtain on the back wall; prune and pick leaves in time to enhance the light transmittance of the field.
